White and yellow 11W Brilliance DRL LED Daytime Running Lights Kits For Cars MCL190 manufacturer from China Guangzhou Wincar Electronics Co.,Ltd

Place of Origin:

Zhejiang, China (Mainland)

Product Detail

Model No.: MCL190

LED DRL Lights For Brilli

LED DRL Lights For Brilliance V5 2012 - 2015 , Daytime Running Lights Kits For Cars

Specification:

LED Type	Cree
Efficient Power	11W
Lumen Flux	1100LM
LED Color	White and yellow
Current	1.0Amp 12V DC;
Parameter/Features	1.IP Grade:IP-67 Warranty:1 yrs 2.Input voltage :DC12V 3.Lamp type:CREE LED from Taiwan 4.Life-span:Above 50000 hours 5.Lamp Cup Material:PMMA+ABS 6.Option beam:30°~60°(pencil~flood) 7.Color Temp:6500K-7000K

Product Features

1. Offering a definitive leap for road traffic safety, effectively preventing accidents by 58%;

2. Drawing the driver’s attention in shorter time;

3. With LED light having longer (about 30 times) service hours than ordinary halogen lamp;

4. Less fuel consumption to save energy;

5. DRL conforms to ECE R87, but those that are of specific positions and functions should still be

subject to ECE R7 regulations;

6. Cooling fins with aluminum hulls can ensure the most proper temperatures while in operation or on

standby;

7. Protective loop with multi-functional drive can protect LED light from high voltage surges;

Installation Manual

Please carefully read these instructions before installation, as incorrect installation may damage your

car; if you are uncertain about the method of installation, please consult the dealer or professionals.

Ensure lights, air-conditioning system and other devices are all shut off before installation, and then open the engine hood;
Use proper tools to remove the front bumper and install the DRL to the proper position, and
then fix the power box and the DRL properly;
Wiring Installation (refer to Wiring Diagram)

Check the harness of DRL control box, and then connect the yellow wire to the battery’s anode+, and connect the white wire to head lamp’s anode+, and connect the red wire to ACC terminal and the black wire to the battery’s cathode;

Notice: ACC refers to the wire in the second part of key switch which used to energize the engine, you

may find it in 3 positions:

A. One piece of ACC is in the key booster cable.

B ACC fuse can be founded in the fuse box under the wheel pillar.

C For some types of cars, ACC can be founded in the fuse box of engine chamber.

Check the harness of DRL and then firmly connect two connectors in the harness to control box connectors. Pay attention to the direction of connectors: the harness plug at the side of lock catch should share the same direction with the control box jack.<