100% DSP 32bit IC PCB

1. Real 100% DSP PCB board with high quality, Ensure the most safe driving,
2. DSP 32bit PCB: Working temperature: -42°C~+125°C(work perfect in Russia, Canada, North EU, etc)
LED & EMC connector on the wire, Polarity protection,
High integrity, use many SMT components, upgrade technology,
3. DSP works better with bulbs, lower flashing/flickering,
4. DSP has higher efficiency, 10°C lower than MCU based on same heat radiating area,
Working temperature: DSP:-42°C~+125°C
5. DPS: better precision on control, tolerance<1W,
6. Bigger range Voltage-in: DSP: 8.5V-32V,
7. Ignition feature: MCU: V-min is 4.5A; DSP: V-min is 3.8A, better CANBUS performance,
8. Lighting up 30% faster than normal MCU based on same Current-start, ensure you best driving feeling.
9. Much more reliable work performance, long lifespan. for high-end market.
10.The Digital PCB board can control the current, power watt more accurately. For example, our cold

start current is about 4-5A, which will cause less damage to the car computer system, also protect the

hid bulb. Some low quality analog ballast start current reaches 9A, 10A, 12A ... which hurt the ballasts very badly, causing the ballast easy to burn and burn car engines.
11. Difference between Digital and Analog ballast ? 
12. The difference between a Digital Ballast & an Analog Ballast is that the Analog ballast is controled by

the circuit of a capacitor & a resistor.(Older Technology), but the Digital Ballast is controlled by a

13. CMOS Digital Chip (Newer Technology). The Digital Chip has a memory & is able to run more efficiently and ignite the bulb more quickly.(Analog& Simulant - about 30 seconds, Digital - about 5 seconds)
Besides, the digital ballast can control the current ± 1V, but analog only can do ± 5V.that's why digital ballast much better.